Hi
anyone know if cisco catalyst 6500 with sup2/msfc2/pfc2 can support VPLS ?
because i have:
c6509-1#sh mpls l2transport vc 135 detail Local interface: VFI Internet up Destination address: 172.20.10.1, VC ID: 135, VC status: down Tunnel label: not ready, LFIB entry present Output interface: unknown, imposed label stack {} Create time: 00:15:31, last status change time: 00:13:31 Signaling protocol: LDP, peer 172.20.10.1:0 up MPLS VC labels: local 23, remote 24 Group ID: local 0, remote 0 MTU: local 1500, remote 1500 Remote interface description: Sequencing: receive disabled, send disabled VC statistics: packet totals: receive 0, send 0 byte totals: receive 0, send 0 packet drops: receive 0, send 0
c6506-2#sh mpls l2transport vc 135 detail Local interface: VFI Internet up Destination address: 172.20.10.2, VC ID: 135, VC status: down Tunnel label: not ready, LFIB entry present Output interface: unknown, imposed label stack {} Create time: 00:18:41, last status change time: 00:15:26 Signaling protocol: LDP, peer 172.20.10.2:0 up MPLS VC labels: local 24, remote 23 Group ID: local 0, remote 0 MTU: local 1500, remote 1500 Remote interface description: Sequencing: receive disabled, send disabled VC statistics: packet totals: receive 0, send 0 byte totals: receive 0, send 0 packet drops: receive 0, send 0
c6506-2#sh mpls l2transport vc
Local intf Local circuit Dest address VC ID Status
------------- -------------------- --------------- ---------- ---------- VFI Internet VFI 172.20.10.2 135 DOWN
thanks for your help