|
Posted by bob on January 26, 2006, 4:36 am
Please log in for more thread options
Hi would any 1 know why my cisco 2811 will not let me confirure port
security on the lan ports , dosnt seem to support the commands ios is
12.4-3a
cheers for any info
|
|
Posted by summi on January 26, 2006, 10:13 am
Please log in for more thread options
HI
U cannot configure Port-Security in routers, as it not meant for
switching the layer2 packets. u can configure Mac-based access-lists
if u want to restrict mac addresses in the router.
|
| Similar Threads | Posted |
| cisco 2811 lan port config issues | January 26, 2006, 4:36 am |
| Cisco ASA5510 config issues | September 30, 2009, 7:59 pm |
| Connecting to a Cisco router's Console port via Zterm - Issues | August 1, 2007, 1:21 am |
| Connecting to a Cisco router's Console port via Zterm - Issues | August 1, 2007, 1:36 am |
| 2811 snmp for what mac's are on which port ( simliar to the sh mac-add ) | February 12, 2007, 3:26 pm |
| 4-port internal switch for 2811 and 1 vlan | March 26, 2007, 11:19 pm |
| VPN to Three Sites, getting issues with one. Please audit config. | December 15, 2005, 3:23 pm |
| HELP VPN, Routing issues, no acess to 25 port of exchange | May 27, 2006, 4:26 am |
| Config Maker 2.6 timing out on Com port | May 24, 2007, 4:26 pm |
| Port Channel config Question with Private-vlan | August 15, 2008, 1:47 am |
| mib for Cisco 2811 | October 31, 2005, 11:27 am |
| Cisco 2811 SDM | July 7, 2006, 7:31 am |
| Cisco 2811 and SIP, what do I need? | April 27, 2009, 10:08 am |
| Cisco 2811 max. troughput | May 9, 2006, 8:35 pm |
| IPSEC with a Cisco 2811? | May 3, 2007, 9:29 am |