Hi guys, Does anyone knows if the PWR-C45-1000AC power supply is supported on the Catalyst 4006, i know that the minimum requirement for the image is
12.1(12c)EW, but dimensions wise is it a standard or it differes from the WS-X4008 power supply. Thank youHi guys, Does anyone knows if the PWR-C45-1000AC power supply is supported on the Catalyst 4006, i know that the minimum requirement for the image is
12.1(12c)EW, but dimensions wise is it a standard or it differes from the WS-X4008 power supply. Thank you
The 4006 and 4506 use different power supplies. The 4006 uses three smaller power supplies, while the 4506 uses two larger power supplies.
Scott
Hi Andy,
WS-X4008= Catalyst 4003/4006 AC Power Supply (Spare)
WS-X4095-PEM= Catalyst 4000 DC Power Entry Module (Spare)
WS-P4603= Catalyst 4000 Aux. Power Shelf (3 slot) (spare)
WS-X4608= Catalyst 4603 Power Supply Unit for WS-P4603
--------------------------------------------
PWR-C45-1000AC= Catalyst 4500 1000W AC Power Supply (Data Only)
PWR-C45-1300ACV= Catalyst 4500 1300W AC Power Supply (with PoE)
PWR-C45-2800ACV= Catalyst 4500 2800W AC Power Supply (with PoE)
--------------------------------------------
Hope this helps.
Brad Reese Cisco IOS Software - Compatible Partner Matrix by Technology
Thx guys, you have been a great help.
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.