|
Posted by PS on January 20, 2007, 2:10 pm
Please log in for more thread options
We want our wireless clients to get their IP address assigned by the router on
the
network, not the AP.
We tried configuring the 1100 with a static IP address in the proper subnet, as
well as
setting it as DHCP so it would get its own address from the router. Both of these
configurations work as far as the 1100 being seen on the network. However,
wireless
clients never get an IP address despite being able to connect to the signal. The
1100
seems to not want to pass these DHCP requests through to the DHCP server on the
router.
How can this be resolved?
|
| Similar Threads | Posted |
| Wireless clients can't get DHCP address from router behind Aironet 1100 | January 20, 2007, 2:10 pm |
| Configure Aironet 1100 with static ip and as a DHCP server | June 7, 2006, 3:05 pm |
| Some wireless clients cannot detect my unbroadcast Aironet AP | July 3, 2008, 11:21 pm |
| Aironet 1100 and WPA-PSK | November 9, 2005, 2:44 pm |
| Aironet 1100 | February 23, 2006, 6:51 am |
| Re: Aironet 1100 | February 23, 2006, 7:11 am |
| Aironet 1100 | June 28, 2005, 5:46 am |
| PIX 515 and Aironet 1100 Integration | February 10, 2006, 5:16 pm |
| aironet 1100 ios upgrade troubles | April 9, 2007, 5:56 am |
| Aironet 1100 OpenVPN and WPA2 authentication | April 3, 2006, 4:32 am |
| HELP: Forgot how to get into Cisco Aironet 1100 configuration | December 19, 2006, 11:37 pm |
| Help needed for AP Aironet 1100 firmware upgrade | January 10, 2007, 9:00 am |
| Cisco Aironet 1100 VLAN creation (over snmp) | September 27, 2005, 7:23 pm |
| Aironet 1100 how to shut Radio Dot11 int via SNMP | September 16, 2007, 9:17 am |
| Client Gateway Address in DHCP - Router or Firewall? | March 1, 2006, 11:00 am |