Upgrading Cisco IOS on C2916M-XL.
Bookmark this page:
 Yahoo!
 Google
 Windows Live
 del.icio.us
 digg
 Netscape
|
|
|||||||||||||||||||
|
Posted by benchmark on October 4, 2006, 11:11 pm
Please log in for more thread options I have recently bought the above-mentioned switch from ebay and I am upgrading the the Cisco IOS image on it to c2900XL-hs-mz-112.8.11-SA6. I have already uploaded the .bin file and the switch is currently running the new Cisco IOS. However, I also need to run run tar /x tftp://server_ip_address//path/filename.tar flash:html to load the html pages on to the switch. I have installed TFTP Server on a PC and put the c2900XL-hs-mz-112.8.11-SA6.tar there. I then run the tftp command above on the switch. However, I am getting the error message unenable to find file or directory. Can anybody help me? Desperate, Benchmark. | |||||||||||||||||||
|
Posted by www.BradReese.Com on October 4, 2006, 11:31 pm
Please log in for more thread options Catalyst 2900XL and 3500XL switches normally load a valid image present in Flash memory. If a message indicating an error loading flash is displayed during system bootup, or the switch is reloading continuously, it indicates the software image present in the Flash is corrupt, missing, or the boot variable in the configuration file is not set correctly. The method used to recover the switch depends on whether a bootable image is present in the Flash. A filename with the extension .bin specifies a bootable image in Flash. To resolve this issue, perform these steps: Step 1: To determine whether there are any image files in Flash, issue the dir flash: command. Step 2: If a valid image is present, you can manually boot the switch from the image by issuing the boot flash: command. Step 3: If there is no valid image present, load an image into the switch by using the X-modem procedure. Recovery From Corrupt or Missing Software Image on Cisco Catalyst 2900XL and 3500XL Series Switches: http://www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note09186a0080094955.shtml Hope this helps. Brad Reese BradReese.Com - Cisco eBay Repair Service http://www.bradreese.com/ebay-cisco-repair.htm 1293 Hendersonville Road, Suite 17 Asheville, North Carolina USA 28803 USA & Canada: 877-549-2680 International: 828-277-7272 Fax: 775-254-3558 AIM: R2MGrant BradReese.Com - Cisco Power Supply Headquarters http://www.bradreese.com/cisco-power-supply-inventory.htm | |||||||||||||||||||
|
Posted by www.BradReese.Com on October 4, 2006, 11:36 pm
Please log in for more thread options Hi Again Benchmark,
You may wish to investigate: Upgrading Software in Catalyst 2900XL and 3500XL Switches Using the Command Line Interface http://www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note09186a00800946e5.shtml Sincerely, Brad Reese Cisco Technical Forums http://www.bradreese.com/cisco-technical-newsgroups.htm | |||||||||||||||||||
| Similar Threads | Posted |
| Upgrading Cisco 3640 | June 12, 2006, 7:43 pm |
| Upgrading Cisco IOS on C2916M-XL. | October 4, 2006, 11:11 pm |
| Upgrading ROM in Cisco 2620 | January 5, 2008, 10:50 pm |
| Upgrading Cisco 1113 ACS SE | May 13, 2008, 9:21 am |
| Upgrading flash -> 32 mb. Cisco 3640 | July 22, 2005, 6:56 pm |
| upgrading Cisco 2514 from console | September 25, 2005, 2:31 am |
| Upgrading flash in a Cisco 877W | October 27, 2006, 5:31 am |
| Upgrading a Cisco 2600 Series Router | November 15, 2006, 1:27 pm |
| Upgrading the Cisco IOS on Cisco router 3640. | July 27, 2007, 8:43 pm |
| upgrading the ios. | February 13, 2005, 6:32 pm |
| PIX 7.0.2 upgrading from 7.0.1. | July 29, 2005, 5:09 pm |
| Upgrading PIX 515 from 5.1 to 7.x | September 2, 2006, 1:05 am |
| Does the PIX 515 have to be rebooted after upgrading from PDM 3.0(1) to 3.0(3)? | August 10, 2005, 1:58 pm |
| UPGRADING 3550 SMI to EMI | August 12, 2005, 4:39 am |
| Upgrading IOS on 2500 | April 24, 2006, 6:54 pm |