|
Posted by PATCHES on May 5, 2008, 10:21 am
Please log in for more thread options
I currently have a Cisco 2500 series router that supports a serial
(sna/sdlc) connection on a point to point circuit. My customer has
requested that the current circuit be removed and the traffic be sent
across the internet to their office. I have been looking at the
different available options and had settled on a STUN solution.
Recently I have come across the option to use DLSW instead.
My question has several parts.
What transport method should I use, which is the best, and what does
it take to implement each?
I kind of understand how to configure the STUN configuration on the
Cisco router ports.
Any help will appreciated.
Thanks
|
| Similar Threads | Posted |
| SNA Over Ethernet across Internet Link | May 5, 2008, 10:21 am |
| ethernet link-aggregation between routers | October 10, 2005, 2:24 pm |
| Backup Internet Link | January 7, 2008, 8:42 pm |
| HSRP and Ethernet Internet Handoffs | September 24, 2006, 11:08 pm |
| Branch can't get to internet, can't ping anything but ethernet at main site. | April 22, 2006, 11:58 am |
| Simple Ethernet to Ethernet setup (cisco 1605R) But I can't get it to work. | July 7, 2005, 12:59 pm |
| Use router ethernet interface as a layer 2 ethernet port | November 24, 2006, 7:53 pm |
| Routing Question - How to send default internet traffic to PIX and VPN traffic from router out internet | February 27, 2007, 1:58 pm |
| Ethernet and non Ethernet Leads | April 1, 2007, 1:49 am |
| Ethernet and non Ethernet leads | April 1, 2007, 1:49 am |
| 804 LAN to LAN Link? | August 31, 2005, 12:47 pm |
| Link down due to STP | June 18, 2008, 4:05 am |
| Fail over from a LAN to a WAN link | September 26, 2005, 5:54 pm |
| Redunant link and BGP | January 29, 2006, 8:44 am |
| IPSEC Link Goes Down | August 3, 2006, 6:49 am |
SNA Over Ethernet across Internet Link
Yahoo!
Google
Windows Live
del.icio.us
digg
Netscape
