|
|
|
Bookmark this page:
Yahoo!
Windows Live
del.icio.us
digg
Netscape
|
|
||||||||||
|
Posted by John Oliver on July 17, 2006, 8:17 pm
Please log in for more thread options
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(20)EA1a, RELEASE SOFTWARE (fc1) 2950_1#sh ip ? access-lists List IP access lists accounting The active IP accounting database aliases IP alias table arp IP ARP table dhcp Show items in DHCP igmp IGMP information interface IP interface status and configuration local IP local options nat IP NAT information redirects IP redirects sockets Open IP sockets traffic IP protocol statistics -- * John Oliver http://www.john-oliver.net/ * | ||||||||||
|
Posted by Wayne on July 17, 2006, 8:30 pm
Please log in for more thread options The 2950 is a Layer 2 switch. The only "route" it knows is the route 0.0.0.0 0.0.0.0, which is set by the ip default-gateway command. And remember, that is for management purposes only. | ||||||||||

No sh ip route ?
Yahoo!
Windows Live
del.icio.us
digg
Netscape 



> IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(20)EA1a, RELEASE
> SOFTWARE
> (fc1)
>
>
> 2950_1#sh ip ?
> access-lists List IP access lists
> accounting The active IP accounting database
> aliases IP alias table
> arp IP ARP table
> dhcp Show items in DHCP
> igmp IGMP information
> interface IP interface status and configuration
> local IP local options
> nat IP NAT information
> redirects IP redirects
> sockets Open IP sockets
> traffic IP protocol statistics
>
>
> --
> * John Oliver http://www.john-oliver.net/ *