Cisco Systems Need help with setting up L2TPv3

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Need help with setting up L2TPv3 pfisterfarm 06-25-08
Posted by pfisterfarm on June 25, 2008, 11:30 am
Please log in for more thread options
In configuring L2TPv3, I'm getting:

Jun 25 10:07:20.077: uid:43 Tnl/Sn 32862/8086 L2TP: Session state
change from wait-connect to wait-for-service-selection-icrq
Jun 25 10:07:20.077: uid:43 Tnl/Sn 32862/8086 L2TP: Started service
selection, peer IP address 192.168.7.1, VCID 77
Jun 25 10:07:20.081: uid:43 Tnl/Sn 32862/8086 L2TP: disconnect (L2X)
IETF: 9/nas-error Ascend: 62/VPDN No Resources

The only reference I've found in searching was something that didn't
really seem to apply to what I was working on. Does this sound like a
lack of memory?

Thanks!

Similar ThreadsPosted
Need help with setting up L2TPv3 June 25, 2008, 11:30 am
PPP LFI over L2TPv3 November 2, 2006, 8:09 am
L2TPv3 tunnel and SSS June 20, 2008, 9:25 am
L2TPv3 and vlans June 20, 2008, 12:02 pm
L2TPv3 - one-way tunnel? July 1, 2008, 4:42 pm
L2TPv3 support on 3640 May 21, 2008, 6:08 pm
Question on L2TPv3 authentication June 18, 2008, 12:00 pm
Re: 3845 and l2tpv3 pseudowire problem May 12, 2008, 9:19 am
Setting up VPN March 30, 2006, 1:40 pm
Setting the MTU April 22, 2006, 1:48 pm
setting up a T1. November 6, 2006, 1:20 pm
Difference in setting up ATM 0 or ATM 0.1 February 8, 2005, 8:32 pm
Setting up policer using IOS July 19, 2005, 5:45 am
Setting up an 831 router on SBC DSL July 25, 2005, 6:38 pm
Setting IPs for PA-2FE-TX and IO/2FE in a 7206VXR October 7, 2005, 1:59 pm