Cisco Systems Made a mistake Cisco router 3640

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Made a mistake Cisco router 3640 elliotth123 09-21-05
Posted by elliotth123 on September 21, 2005, 8:40 pm
Please log in for more thread options
Help, I changed our router to enable http to allow me to install the
sdm software and I thought i created a user and opassword at the time
but it didn;t seem to work. I use to only have to enter a password and
that was it now I can't get into it at all!! Is there anyway of
restoring that setting without redoing the entire thing or recovering a
user name and pw? I am new at routers so please bear with me but any
help would be great!!


Posted by Merv on September 21, 2005, 9:43 pm
Please log in for more thread options

get password recovery procedure at

http://www.cisco.com/en/US/products/hw/routers/ps259/products_password_recovery09186a0080094675.shtml


Suggest you print it out, read it VERY carefully and then follow it


Similar ThreadsPosted
Made a mistake Cisco router 3640 September 21, 2005, 8:39 pm
Made a mistake Cisco router 3640 September 21, 2005, 8:40 pm
Cisco 3640 Config NM-16sw Internal Lan Ethernet to Cable Router doing NAT June 12, 2006, 7:30 pm
Upgrading the Cisco IOS on Cisco router 3640. July 27, 2007, 8:43 pm
HELP - stupid mistake on PIX February 28, 2006, 6:13 pm
Cisco 3640 NM-4E Westell ADSL Modem & Ambit Cable Modem/Router Half 1/2 Speed June 4, 2006, 3:38 pm
3640 Router and NM-2FE August 20, 2005, 4:04 am
G.703 WAN Card for a 3640 router October 26, 2005, 10:13 am
Router 3640 and PIX 501 question January 16, 2006, 10:05 am
3640 router, BGP-4, and 2x ISPs June 30, 2005, 12:44 pm
3640 Router, no crypto isakmp enable February 15, 2005, 1:30 pm
Cisco 3640 with NM-4T1-IMA October 9, 2006, 10:44 pm
Discussion about segregating bandwidth with Cisco 7513, Cisco 3750 and Cisco 3640 June 17, 2006, 8:34 am
Cisco 3640 MFR Setup HELP!!! September 6, 2005, 5:00 pm
Cisco 3640 and WIC-1ADSL May 19, 2006, 1:35 pm