IP SLA - ICMP
Bookmark this page:
 Yahoo!
 Google
 Windows Live
 del.icio.us
 digg
 Netscape
|
|
||||||||||
|
Posted by Darren Green on June 5, 2008, 3:55 am
Please log in for more thread options I have looked at the IP SLA guide for ICMP and I can't work out how often the ICMP requests are sent. I know I can set the timeout and other parameters. In a nutshell my goal is to send 3 x ICMP requests within 60 seconds. On failure my tracked object, a static route, is removed from my routing table). This all works, however, when I tested it yesterday, the 1st ping resulted in the tracked object being removed. This is too quick. Regards Darren | ||||||||||
| Similar Threads | Posted |
| Pings and PIX messages 302020: Built ICMP - 302021: Teardown ICMP Lots of them.... | May 1, 2006, 2:40 pm |
| IP SLA - ICMP | June 5, 2008, 3:55 am |
| icmp weirdness - PIX 501 (does any really mean any??) | September 23, 2005, 10:12 am |
| timestamp ICMP ? | April 16, 2006, 11:45 pm |
| ICMP pinging. | October 3, 2006, 7:22 am |
| PIX 501 - allow icmp out but deny everything else out | November 18, 2006, 1:49 am |
| PIX 6.3.4 - I have question on a VPN setup & ICMP | August 26, 2005, 11:08 am |
| PIX7.x/ASA and icmp redirects | April 19, 2006, 12:30 am |
| ICMP access list | October 9, 2006, 10:55 am |
| Cisco icmp problems | April 13, 2007, 12:32 pm |
| ICMP Redirect Query? | February 24, 2008, 4:44 pm |
| ASA, static, icmp and inspect FTP | August 22, 2008, 5:11 am |
| icmp type 11 cause pix to deny traffic | July 27, 2005, 12:16 pm |
| Setting ip icmp rate-limit | January 17, 2006, 1:39 pm |
| ASA5510 - selectively blocking icmp and DNS | June 28, 2006, 1:07 pm |