Cisco Systems Cisco AIR-LAP1142N-E-K9 conversion to standalone required
Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Cisco AIR-LAP1142N-E-K9 conversion to standalone required PeterD 02-02-10
Posted by PeterD on February 2, 2010, 3:58 am
Please log in for more thread options




-------------------------------------

Hi, I have a quantity of Cisco AIR-LAP1142N-E-K9 Wireless Access points
which I urgently need to convert to Standalone Mode.

If anybody could provide me with step by step instructions I would very
very much appreciate it.



--
+----------------------------------------------------------+
|
http://forums.cabling-design.com/ |
| *** a better way
to USENET *** |
| no-spam Web and RSS interface to your favorite
newsgroup |
| comp.dcom.sys.cisco - 45204 messages and counting! |
+----------------------------------------------------------+


Posted by Aaron Leonard on February 2, 2010, 10:38 am
Please log in for more thread options



~ Hi, I have a quantity of Cisco AIR-LAP1142N-E-K9 Wireless Access points
~ which I urgently need to convert to Standalone Mode.
~
~ If anybody could provide me with step by step instructions I would very
~ very much appreciate it.

http://groups.google.com/group/comp.dcom.sys.cisco/browse_thread/thread/c22f5f42632e524e

Similar ThreadsPosted
Cisco AIR-LAP1142N-E-K9 conversion to standalone required February 2, 2010, 3:58 am
Cisco 678 CAP to DMT conversion problem - help!? June 9, 2006, 1:07 pm
Cisco Catalyst 3550-24 SMI to EMI conversion February 15, 2006, 9:55 am
Cisco 350 bridge vx works to IOS conversion (WPA) July 2, 2005, 8:54 am
Cisco Trainer Required - UK January 2, 2007, 1:46 pm
Cisco 1601 cookie required February 28, 2006, 8:30 am
Required Cisco ICM Engineer - Irving, TX / Tampa, FL March 22, 2007, 10:56 am
SNMP OIDs required for Cisco 1200 and Cisco 1100 series APs November 7, 2006, 9:44 am
Cisco 837 and a serial modem? Special cable required? July 24, 2005, 7:02 pm
feature set required for VPN termination on a cisco 2500 router September 18, 2005, 7:43 am
Boot ROM chip required to upgrade both a Cisco 2610 and a Cisco 2620 router to support 32 megs+ flash and more than 64 megs RAM June 14, 2007, 10:57 am
350 AP to Bridge Conversion January 17, 2006, 11:02 am
snmp conversion June 29, 2005, 12:59 pm
G.703 to Fastethernet Conversion. April 12, 2007, 3:07 pm
unicast to multicast conversion? February 10, 2005, 8:53 pm
Residential Cabling Guide

Home Cabling Guide

Finally, an instantly downloadable book that saves you thousands in home improvement dollars! Enjoy living in 21st century technology-advanced home while increasing its selling value and competitive advantage on the real estate market. Whether your cabling is for home office or high-tech leisure, you can wire your home yourself or learn "wirish" to speak with your cabling contractors in their language!

Learn More