Latest threads in Cisco Systemsshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
error while installing HWIC-1CE1T1-PRI V02 interface card
Dear Team, I have Cisco 3845 router with Cisco IOS Software, 3800 Software (C3845-ADVENTERPRISEK9-M), Version 12.4(25d). "flash:c3845-adventerprisek9-mz.124-25d" I installed HWIC-1CE1T1-PRI V02...
1
|
10 years ago
|
1 | |
|
Need to be able to report on one specific WLAN
I've been asked to generate some report data on a specific WLAN, a limited access WLAN that was added recently. We need to be able to report on "Avera ge and Peak Number of clients (Total)" and "Total...
—
|
10 years ago
|
— | |
|
Bandwidth limition of switch port 3750
Dear All, i hope ur fine and this email will find u in the best of times, Plz help me how to limit bandwidth on switch port 3750 sw cisco kinely regards
1
|
10 years ago
|
1 | |
|
forward multicast between 2 interfaces on a cisco router
Hi, I want to forward multicast packets: Src 192.168.2.12 multicast dst 225.2.1.14 And Src 192.168.2.22 multicast dst 225.2.1.24 They are going to an address 10.100.1.8 So basically I want to forward...
5
|
10 years ago
|
5 | |
|
outside PAT
Hello, the following scenario: --- net1 --- PIX --- net2 | | net3 The Pix runs OS 7.2. Computers reside in net2 and communicate with the world via net1. In net3 are a few hosts. Security levels are...
1
|
11 years ago
|
1 | |
|
VoIP gateway
Hello I am thinking of installing a Cisco UC560 VoIP gateway in our office. we have a sub office with 1 phone in it about 200kms away is it possible to install a single VoIP phone there and have it...
—
|
11 years ago
|
— | |
|
UC 560
Hello Which Cisco wireless IP phone can I use with the UC560. Can I mix it with SPA500 series phones
—
|
11 years ago
|
— | |
|
pppoe on 802.1q with cos
Hi, I search a configuration for a CPE (cisco 800 or 1700 or 1800). I have tu use an Ethernet port (not the ATM interface, I have a modem). I have to tag all my packet with a vlan ID (ID 2900 so ISL...
—
|
11 years ago
|
— | |
|
A simple way pass through T1 Modem lines to IP/PORT
Hello Guys, 1. I have a CISCO 2921 with HWIC T1 card 2. I also have a PVDM2-24DM Digital Modem Adapter 3. I have a TAP (Telocator Alphanumeric Protocal) gateway listening on IP:PORT on an external...
4
|
11 years ago
|
4 | |
|
IPV6 address configuration
With a command... R1(config-if)#ipv6 address 2001:5c0:1400:a::331/64 eui-64 ...one can configure an address for an interface with EUI-64 part generated from actual MAC address on this interface. How...
2
|
11 years ago
|
2 | |
|
Supressing PIX message?
Hello, on a PIX515 with software 7.2(3) I have the following: logging enable logging timestamp logging list verbindungslog level warnings logging list verbindungslog message 604103 logging list...
—
|
11 years ago
|
— | |
|
hange the parameter ip phone cisco crossing a wab page
hallo, how to change the parameter ip phone cisco crossing a wab page greetings.
3
|
11 years ago
|
3 | |
|
Rack mounting an MSE 3310
I've got an MSE 3310 that came with four-post rails for rack mounting. These came without instructions and we are having a hard time figuring out exactly how they work. Any help or links to how to use...
—
|
11 years ago
|
— | |
|
Need help on figuring why packets are getting dropped
We have several remote sites connecting to a central location. Each remote site has its own file and print server hosted at the central location as vi rtual machines. Recently, we've been having...
5
|
11 years ago
|
5 | |
|
using ciso 1131 wifi AP with wifi extender
ok. so not only is it not supported, but it won't work either. you say 'non-cisco'. linksys makes these wifi extenders too. any chance that we'll have some luck with that? don't get me wrong. i was...
2
|
11 years ago
|
2 |