Latest threads in Cisco Systemsshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
FCIP issues with SAN replication
Greetings all, My company is attempting to perform replication from one HP EVA SAN array to another HP EVA SAN array across the WAN. We have a metro Ethernet connection between the two with one...
9
|
13 years ago
|
9 | |
|
|
Cisco PIX 501 - VPNC connections blocked from internal lan to external end-point
Hi, Support question here. I have a Cisco PIX 501 that won't let a VPNC connection past. It will allow the client to authenticate with an end-point, but won't actually pass the packets. I know this is...
4
|
13 years ago
|
4 | |
|
|
Best way to do multiple NAT statements on ASA
Hi, I have 3 DMZs and an inside network. Inside network is 192.168.1.0/24, DMZ1 is 192.168.2.0/24, DMZ2 is 3.0/24, and DMZ 3 is 4.0/24. I want all networks to be able to talk to each other without NAT...
2
|
13 years ago
|
2 | |
|
|
WTR54gs Dropping Connection
Hi folks, since there isn't a linksys group I thought I would post my problem in here. Since Cisco owns Linksys I thought there might be a chance somebody here might be able to help. I have a Linksys...
1
|
13 years ago
|
1 | |
|
|
Brand new ASA5510 acting very strange...
This one has me stumped. I have a brand new ASA5510 Security Plus. It boots up, I can go in via console, but alot of commands that are supposed to work dont. For example, no vlan commands exist. If I...
1
|
13 years ago
|
1 | |
|
|
sip security
cisco 2600 running a sip trunk can sip credentials be 'sniffed' over the internet? One person told me they can, another says it's impossible so I'm confused. The sip password in my router config...
8
|
13 years ago
|
8 | |
|
|
HSRP
Hi All, Is it possible to plug into two routers with HSRP 2 differents type of links : ie LL 2m and a ADSL link. Best regards, Fell.
2
|
13 years ago
|
2 | |
|
|
Filtering BGP networks with access list
Hi, I currently advertise 4 /24s through BGP. I have my distribute list set up as an access list: access-list 110 permit ip xxx.xxx.184.0 0.0.0.255 any access-list 110 permit ip xxx.xxx.185.0...
2
|
13 years ago
|
2 | |
|
|
Missing APs on AIR-WLC4402-25-K9 until boot of a seperate 1242AG
Hi NG, i'm having a strange phenomena such as: AIR-WLC4402-25-K9 with around 17 LWAPP APs running on it. While i boot one of my WS-C3560-24PS, whereby i got like 7 APs attached. After the reload of...
—
|
13 years ago
|
— | |
|
|
cisco asa static ipsec tunnnel with inside and outside nat
Hi, can somebody post example or link for next configuration: Cisco ASA to other one, static IPSec tunnel config with inside and outiside NAT. Thank you!
—
|
13 years ago
|
— | |
|
|
2621 Router Network on a stick config
I have set up a trunk link comprised of native vlan (ip address 192.168.30.15 255.255.255.0) and vlan 500 ( ip address 192.168.25.15 255.255.255.0). Both are sub-ifs of eth0/0. From the router, I am...
3
|
13 years ago
|
3 | |
|
|
Cisco's Hall of Fame inaugural inductees
Cisco's Hall of Fame inaugural inductees: Blog Archive for Brad Reese Speaks Out http://www.bradreese.com/blog/6-18-2010.htm
—
|
13 years ago
|
— | |
|
|
Troubleshooting Trunks
A host is connected to 3550 f0/12 assigned to VLAN 106. Int VLAN 106 is 10.1.106.27, which the host can ping. A trunk is configured on G0/2 connecting it to 4507 int G2/1. Int VLAN 106 is 10.1.106.1...
1
|
13 years ago
|
1 | |
|
|
Catalyst 2950 VLAN Trunks
I have setup vlan trunking between fortigate firewall and catalyst 2950. On the trunk, I am working with two interfaces. One is physical and the other is vlan 550. Considering that physical interface...
—
|
13 years ago
|
— | |
|
|
VLAN Questions
I am setting up VLANs for each floor plus one for the servers. All the servers will be connected to a separate switch, which is connected to a 4507 that will will do all the routing. 1. Should the...
4
|
13 years ago
|
4 |