Latest threads in Cisco Systemsshow only best voted threads

Subject Author Posted Replies
 
Default Route Question
I have a question that is probably quite simple, I've just never had to do it. I have a Cisco device with multiple interfaces, and I want them all to use the same default gateway except for one. I...
1
1
 
VPN tunnel problems with Cisco ASA 5510... really need help on this one
Here's my situation... I have a central office with a SonicWALL PRO3060 and seven remote offices connected via VPN tunnels over DSL; each remote office has a SonicWALL TZ170. The network layout looks...
 
Allow smtp traffic from DMZ to Inside, without DMZ loosing Internet connection?
Hi. I have a Edge Transport Server (192.168.2.10) in my DMZ zone (192.168.2.0) that need access Exchange 2007 Hub server (192.168.1.10) which sits on the inside network (192.168.1.0) on port 25...
4
4
 
FirePlotter - real-time session monitoring for PIX/ASA
Has anyone tested FirePlotter ( )? Looks really cool - shows bandwidth by protocol and drill-able session exploraiton. What do you think? FirePlotter, Fire Plotter, real-time, real time, firewall,...
 
Can not upgrade Firmware on Wireless LAN Controller 4404
Hi everyone, I have a strange problem that I'm not able to upgrade my WLC-4404 wireless lan controller: (Cisco Controller) >transfer download start Mode................................................
2
2
 
Can't figure out simple routing between 2 Windows domains
I apologize for such a newbie question, but I'm not a routing person but because of staffing issues and some stringent time pressures I have to implement this myself. I'm lost on how to get a very...
6
6
 
3750 ACL processing problem
Hi I have a problem of this kind, i have substituted 2 days ago my 2 core switch configured with HSRP, passing from 2 Cisco 4908G to 2 cisco WS- C3750G-12S. I have copied all the access-list from the...
3
3
 
Cisco PIX 501 and cabling
Ho all, I have a PIX 501 and would like to run Cat 7 cable (or cat 6a cable) through the walls. Will the PIX 501 happily use Cat 7 ( or 6a )? I know that the 501 won't talk fast than 100Mbit but I am...
3
3
 
Cisco 1812 subnet to subnet NAT
Hello, I'm a bit new to Cisco router configurations and I'm wondering if it is possible to specify a 1-1 NAT for whole subnets. I'd like our internal address range (let's say 10.0.0.1/255.255.255.0)...
1
1
 
HowTo assign DNS Server with "ip local pool"
Hi, how can i assign an DNS Server for VPM Clients while using "ip local pool". The "local pool" are used with AAA (ACS). Must i assign the DNS server also with the ACS (cisco av pair) or are there...
2
2
 
Cisco 2620 Router IOS Upgrade
Hi everyone. I use a Cisco 2620 router currently running I am a Cisco registered user and logged into the site to obtain the lastest release of the code. I am really confused about which version I...
9
9
 
Routing problem !
Hi, I've three sites inter-connected by MPLS and running GRE tunnel between them. Only site A has internet connection, i.e. site B & C connect to internet via router A. Now when site B & C connected...
4
4
 
IOS for Cisco Aironet
Hi, Does anybody know if something changes in IOS license for Cisco Aironet Access Points? I can`t download newest IOS (12.3.8-JEB1), I don`t have CCO account, just normal registered user. I can...
4
4
 
ppp multilink slippage in 12.2 mainline?
Is there anything similar to ppp multilink slippage available in the 12.2 mainline code? Dan Lanciani ddl@danlan.*com
6
6
 
Cat 4500 police rate issue
I have a strange problem with a service-policy in a 4503. I set up the policy to rate limit all traffic with DSCP AF21 to 8 Mbps. However when I apply the configuration instead of give me 8 Mbps it...
3
3