Latest threads in Cisco Systemsshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
Problem with GRE (cisco 887, wlan, bvi)
I must be overseeing something really obvious, but I can't get VPN's working on machines connected to the wireless part of a Cisco 887 :-( Does anyone have a "You idiot, you did ${stupid}" or a...
2
|
13 years ago
|
2 | |
|
Question about IOS performance
Hello I have a question that I am not able to answer :) Considering the same machine , for example 2x C3745 with 128F/512D, latest 12.4T IOS on them. One with 12.4 ADV ENTERPRISE and the other with...
1
|
13 years ago
|
1 | |
|
Question about PBR
Meanwhile, at the Job Justification Hearings, bod43 chose the tried and tested strategy of: Right. Which IOS? 12.4.24 seems to have 3.0.14.
10
|
13 years ago
|
10 | |
|
Cisco SRP 527W
The hardware itself seems nice enough, if a little warm in use, but even with the latest firmware on [1.01.11] it's got a distinctly 'beta' feel to it. For example, if you want to use one of the...
—
|
13 years ago
|
— | |
|
Microsoft goes after Cisco Call Manager
It appears that Microsoft is trying to compete with Call Manager. I think Microsoft will fail hard. http://certificationchat.com/content.php?16-Microsoft-Lync-positioned-to-compete-with-Cisco
—
|
13 years ago
|
— | |
|
cisco vlan with 2 dhcp pools
It works! Many thanks for your help!! Boert
8
|
13 years ago
|
8 | |
|
isco hires iPhone 'antenna-gate' executive Mark Papermaster
Lets hope the Catalyst switches don't start to loose packets when you touch it the wrong way. :) http://certificationchat.com/content.php?14-Cisco-hires-iPhone-antenna-gate-executive-Mark-Papermaster
—
|
13 years ago
|
— | |
|
Mixing SMF and MMF cables
I'm just testing trunking on some switches in the lab. There are several SFP modules that are LH-SM and others are SX-MM. I have short patch cords that are just labeled LC-LC. Can I use them for...
1
|
13 years ago
|
1 | |
|
Small question about a Cisco 1603...
... just to know if I have to send that router (I got a few days before) to garbage or if I have a chance to use it for a better scenario: The 1603 have a WIC slot, but I am not sure if I can use an...
1
|
13 years ago
|
1 | |
|
Flat vs Segmented Network Design
I work on a network that supports around 400 users. The network was set up with separate VLANs for each of 8 floors plus one for the server farm and another for wireless. A L3 switch does all the...
7
|
13 years ago
|
7 | |
|
Multicast over aironet 1130ag
Hello, I have 4 Aironet 1131ag access points. I am using brige groups to map two VLANS onto diferent SSIDs. I have a problem with iChat/Bonjour which uses mDNS. I believe that the multicast traffic is...
2
|
13 years ago
|
2 | |
|
RIP's, statics, and frustration; newbie blues
Two old routers (a 2500 and a 1600) , back to back with a serial cable (Dte Dce, & clocking all properly set) with two Dlink VPN routers on either side of the routers and PC's hung off those, 1) RIP...
3
|
13 years ago
|
3 | |
|
Multi Wan on cisco router
Hello I would like to ask your advice and maybe your help :) I am thinking about this: A single router with 4 Wic ADSL . I would like to connect a single router that does NAT1-1 to 4 ADSL link RFC1483...
1
|
13 years ago
|
1 | |
|
Cisco 3620: wich IOS to choose
Hello I am ready to put on production one cisco 3620 (32F/64D) with two NM: NM-1FE-TX 10/100mbit FE interface NM with FE Combo Port Module, 1 Token Ring, 2 WAN On this router I will do the following:...
15
|
13 years ago
|
15 | |
|
GBIC
Need a couple of GBIC units for my Cisco 3548EN. Please contact me directly at if you have some at a reasonable price...
—
|
13 years ago
|
— |