Latest threads in Cisco Systemsshow only best voted threads

Subject Author Posted Replies
 
Cisco 837 and 7Mbit ADSL Line
Hello is a cisco 837 capable of using a 7mbit adsl line? (negotiated 8128 ADSL-1 type line) I mean.. since that router does just NAT and nothing else, is the cpu capable of transferring 7mbit down and...
4
4
 
Can't reinstall router
I hope this is the right group for this question re: my Cicso/Linksys router. Today, I tried to upgrade the firmware of my WRT160N router. I downloaded the upgrade, backed up my configuration. I ran...
 
Cisco ASA: Don't NAT routes anounced via OSPF
Hello, I'm running a Cisco ASA5505 with Software Version 8.4(1) and one interface. I'm using it as an SSLVPN Endpoint. The ASA has a public ip address and give the pool 10.11.11.0/24 to its SSLVPN...
 
Question about Network Security Key on a Linksys
How does one find out the WPA(2)-Personal/Enterprise key on a Linksys perticularly on a WRT110 ? We know the passphrase but not the NetWork Security Key.
 
Flashing lights on C2924-XL-EN
An old Cisco 2924XL-EN switch recently failed here on me. Upon applying power, all the LEDs (for both switch status and port status) flash on and off simultaneously, over and over again. This happens...
3
3
 
Cisco 871 VLANs / ACLs
Hello all. I'm rather a novice to Cisco ACL's, so forgive me if I word this question poorly. Anyhow, I am using a Cisco 871 with Advanced IP Services as my home router and have setup two VLANs. Vlan1...
3
3
 
Global nat issue for PIX or ASA
Hi, Want to know if my case works or not: We want to nat a public ip into web server inside the internal network: the outside interface of the PIX = 202.123.111.2, and inside interface of the pix =...
1
1
 
Meaning of QoS and traffic-shape
Hi, Want to ensure the concept: 1. QoS and Traffic-Shape rate limit We are going to upgrade and download some WAN links. Colleagues want to know if the pre-configured traffic-shape rate limit is...
1
1
 
NAT-PT IPv6 issue
Hi, We found some ipv6 prefix can not be NAT-PT, can anybody tell me what range IPv6 for NAT-PT, we are using C2800 with IOS v12.4 ? We are testing the NAT-PT for IPv6 24xx:0:6ec::/64. THANKs
15
15
 
Trunk on Cisco 877
Hello I have this scenario: HQ: cisco 877 network 192.168.1.0/24 Remote site A: network 192.168.1.0/24 these two places are connected via a Wireless transparent layer2 link and everything works...
2
2
 
Verzion FIOS Video on Demand and Cisco WRVS4400N
I was having a problem getting Video on Demand with my FIOS connection. The solution is to disable the DOS button on the Firewall Basic Settings tab. Apparently the router thinks it is being DOS'd...
 
IRB and station blocks
We're in the middle of a project involving a server at each of several remote sites that is being virtualized at a central location. The virtual machine at the central location is in the same vlan as...
 
Stay with IPv4 internally
Since we use a firewall that uses NAT between our network and the router to our ISP is it possible that we could have the router use IPv4 on the inside interface and IPv6 on the outside? We have...
5
5
 
CCIE Voice - Shared Line and Overlay DNs on CME
CCIE Voice - Shared Line and Overlay DNs on CME PandaeatsBamboo: Shared Line and Overlay DNs on CME
 
Nexus 1000v Setup and Configuration
Nexus 1000v Setup and Configuration PandaeatsBamboo: Nexus 1000v Setup and Configuration