Latest threads in Cisco Systemsshow only best voted threads

Subject Author Posted Replies
 
Cause i = 0x82C1 - Bearer capability not implemented
Dear All, I am facing problem in connecting to the remote router and getting error as " Cause i = 0x82C1 - Bearer capability not implemented ". Pls f ind the sh ver command for the hardware details...
 
cisco switch for sale
Our company have following Cisco products for sale : WS-C2960+24TC-L $430 WS-C2960+48TC-L $790 WS-C2960+24PC-L $775 WS-C2960X-24TS-LL $570 WS-C2960X-48TS-LL $1025 WS-C2960XR-24TS-I $900...
 
ASR products for sale
Our company have following Cisco products for sale : ASR1001-X $5480 EACH ASR1004 $1910 EACH ASR1006 $3800 EACH ASR1000-ESP100 $11530 EACH All new original , 1 year warranty , ready ship If you...
 
1.5 years/18 months contract time limit at Cisco?
I recently found out that there is a contract time limit to work for Cisco. No more contract renewals after that. Is that true? :( Thank you in advance. :)
 
Cisco X2-10GB-CX4
According to the Cisco 10-Gigabit Ethernet Transceiver Modules Compatibility Matrix the only 10GE module with copper interface that will plug into a 3750E is the X2-10GB-CX4. This has an InfiniBand 4X...
2
2
 
DHCP Question
I'm expanding a DHCP IP Scope by changing the subnet mask on a class A network from /27 to /26. What are the important risks that I need to asses on my switches and routers to make sure this...
1
1
 
Secure VPN Connection terminated by Peer(Reason not specified by Peer) Reason:433
I have a client connecting to my VPN infra, for some reason they connect and for about 16 seconds get disconnected and receive an error "Secure VPN Connection Terminated by Peer: Reason:433". I have...
 
wccp only for images
Dear all, Need some help on this setup It does not work properly What I am trying to accomplish is to cache only image requests on wccp server ip wccp web-cache redirect-list 151 . . . class-map...
2
2
 
Valid nvram file name
When using the command 'copy running-config startup-config' you are present ed with a filename choice. What format does this have to be in? Are space s or alphanumeric characters allowed? What file...
1
1
 
Route command
Hi, I am posting a question here because a google groups search revealed there had been a discussion of static IP addresses and the route command in this group. Question: Preamble: I use static...
3
3
 
Problem using multiple port groups on a WS-X6716-10GE
We are trying to add a load balancer to a 10GE port on a WS-X6716-10GE on a Cisco 6509E switch. When the load balancer is online, we experience strang e issues and I'm starting to suspect it may be a...
 
Can packets be routed sequentially through two different VPNs?
I use the ShrewSoft VPN Client to temporarily set up a remote IPSEC VPN fro m my laptop at home to the office RV120 VPN Firewall. Another permanent si te-to-site IPSEC VPN is set up between the RV120...
2
2
 
FCS processing on a 802.1q enabled bridge
Hi all, Let's consider the following scenario. NE1------(port1)[sw1](port2)------NE2 Port1 and port2 of Sw1 are configured as access ports in VLAN 100. NE1 is configured with 192.168.0.1/30 NE2 is...
 
Attackers are hijacking critical networking gear from Cisco
In article <> Nomen Nescio <> wrote: Anybody who trusts equipment sold by Cisco deserves this and more. Legitimate ROMMON firmware replaced with maliciously modified images.
1
1
 
Data structure to store PIM (*,G) and (S,G) entries (multicast route table)
Hi, I would like to know what would be an appropriate data structure to store (*,G) and (S,G) multicast entries (multicast routing table. Thanks Vij