Latest threads in Cisco Systemsshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
Configuration of TRUNK Ports
Hello I am used to HP Procurve switches, where I have for example a port with multiple vlans on it: ex. Port 1 - VLAN 1 untagged VLAN2 tagged VLAN3 tagged. So I let pass via a port, one vlan untagged...
5
|
12 years ago
|
5 | |
|
|
Learn and Generate CME config
is an iPhone app that can generate UC Manager Express (CME) config with a simple few clicks. If you don't know about CME, this is something you can start with. If you have CME background, this is a...
—
|
12 years ago
|
— | |
|
|
cat4506 with supIV crashes, how to analyse traceback?
Hi All! When pasting the output of show version and show platform crashdump into the output interpreter we get no analysis of the crashinfo. Why? It always says Traceback information was not...
—
|
12 years ago
|
— | |
|
|
why we need 'bridge'
Hi, many layer2 ethernet equipment vendor, Cisco as example, have a concept (I don't really know if it is correct to call it concept?) of a 'bridge', i.e. on cisco CLI one needs to explicitly create...
6
|
12 years ago
|
6 | |
|
|
Remote Call Forward - Call Forward your desk phone extension to your mobile
Remote Call Forward - Call Forward your desk phone extension to your mobile Remote Call Forward is an iPhone application that allows you to call forward your desk phone calls to your preferred...
—
|
12 years ago
|
— | |
|
|
PPPoE server - binding IP to username
Hi all, is it possible to bind IP to username in cisco pppoe server? Regards, Jarek
1
|
12 years ago
|
1 | |
|
|
Cisco 2600XM and external eth DSL modem
version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname router ! boot-start-marker boot-end-marker ! enable password xxxxxxxx...
4
|
12 years ago
|
4 | |
|
|
WS-X3548-XL with Cisco IOS® Software Release 12.0(5)XU and later
I'm in need of Cisco IOS® Software Release 12.0(5)XU and later for my 3548XL swtich. I'm trying to get QOS working on my in home network to eliminate video breakup caused by UDP packet loss. If you...
1
|
12 years ago
|
1 | |
|
|
JQ Phone - Customize your Cisco IP Phone by iPhone
JQ Phone is an application that allows you to change your Cisco IP Phone ba= ckground and customize it into an unique phone. You can use the iPhone lib= rary or take a picture live and send it to IP...
—
|
12 years ago
|
— | |
|
|
How to do load-balancing with multiple uplinks
Hello I am in this situation: I have two DSL Routers, doing NAT on the following IP: R1: WAN: pppoe dialup adsl LAN: 192.168.27.1/24 R2: WAN: pppoe dialup adsl with ISP #2 LAN: 192.168.27.2/24 I have...
12
|
12 years ago
|
12 | |
|
|
Cisco CME Config Generator v1.2
version 1.2 is released! This is an app that can generate UC Manager Express (CME) config with a simple few clicks. Key features - Show sample SIP and SCCP CME config - PVDM3 audio and video sample -...
—
|
12 years ago
|
— | |
|
|
iPhone apps - 1-click Extension Mobility
This is an iPhone application that allows you to login / logout your IP phone from iPhone using Extension Mobility. Good thing is you don't have to enter username and password every time, and your...
—
|
12 years ago
|
— | |
|
|
Need simple ASA 5505 NAT help
Before setting up an ASA 5505 I put the latest OS 8.4.2 on it, and the NAT commands are not transparent to me. That's an understatement. What I would like to do in the very beginning is just get it to...
1
|
12 years ago
|
1 | |
|
|
ASA / Intermittent NAT problem
Hi all, I'm kind of stuck at trying to troubleshoot a problem I have with a set of Cisco ASA boxes. The box has address 217.x.y.26, and I've configured 2 extra IP addresses: .15 to redirect http to a...
1
|
12 years ago
|
1 | |
|
|
iPhone apps - Cisco CME Config Generator
iPhone apps - Cisco CME Config Generator An iPhone apps that allow you to generate Cisco CME router config without need to know a single line of CLI command!! Now on iTunes apps store!
—
|
12 years ago
|
— |