Latest threads in Cisco Systemsshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
Cisco Switch Question
Hi There; I inherited a Cisco 3550 Series Switch (WS-C3550-24-SMI) - I won't pretend to know IOS very well, but is version 12.2(35)SE. I am attempting to create some VLANs on it, however, I see...
4
|
12 years ago
|
4 | |
|
crossed networks
Two ISP's with two blocks of Static ip's One block split by switch and then into a series of routers, then into internal network to web servers, PC's and proprietary comm. devices Second block using...
—
|
12 years ago
|
— | |
|
Does Cisco make a SSL VPN router, with a "simple" GUI config?
You don't say how many users, which is important for Cisco licensing.. Ie. for SSL-VPN on Cisco branch routers, you will need to license it with the FL-SSLVPN25-K9 part # which is for 25 users. That...
39
|
12 years ago
|
39 | |
|
MAC acl
Hello, some Cisco switches support MAC access lists on ingress traffic only. I'm trying to understand why it doesn't make sens (impossible?) to implement MAC ACLs on *egress* traffic. Is it because...
—
|
12 years ago
|
— | |
|
877 ADSL
I have just loaded an 877 with 15.1 IOS the config is the same as i was using with 12.4 If the is no traffic through the modem for about 10 mins the ATM seems to go to sleep. ping atm int a0 0 34 seg...
3
|
12 years ago
|
3 | |
|
priority tagged frames
Hello I hear that priority-tagged frames, i.e. frames having 0x8100 ethertype AND valan id equal to 0, are considered untagged from the VLAN-aware bridge perspective. however I could find exact...
—
|
12 years ago
|
— | |
|
catalyst 3750
There's your clue. 172.19.44.1/24 10.10.10.1/24 Change 172.19.44.1 to 10.10.10.2 or 10.10.10.1 to 172.19.44.2 and you should have more luck. Rgds, Martin
1
|
12 years ago
|
1 | |
|
switch ports types (access, trunk, hybrid ..)
Hello, usually ports on the L2 switches can be configured in the following modes: access, hybrid or trunk (I think, terminology may vary among the different vendors). The IEEE 802.1q standard actually...
3
|
12 years ago
|
3 | |
|
cisco 1812 bgp multihoming
Hi There is posibility to make bgp with 2 isp with full feed on CISCO 1812, 256MB RAM, IOS 12.4 (15) T9 ? It will be max 20/20 Mbit/s, only for 1-1,5 year. Let's there will no nat, no ipsec, only...
1
|
12 years ago
|
1 | |
|
trunking with vlan in netgear
Hello Experts, Hope you are doing well..!!! i am newbie in network field I have a netgear portsafe 16 port smart switch model(GS716T) now i want to implement vlan so can anybody tell me how to do...
2
|
12 years ago
|
2 | |
|
GLBP on c2610 with 12.3(26)
I am very hungry!!!! According to the docs, the IOS 12.3 supports GLBP well, I have in front of me one 2610 16F/64D with 12.3(26) full and id doesn't have GLBP Cisco Internetwork Operating System...
1
|
12 years ago
|
1 | |
|
Cisco 836 VLAN Support
Hello, is it possible to add vlan support to the cisco 836 adsl router with a certain ios image? Thanks, Marco
1
|
12 years ago
|
1 | |
|
What is wrong with my multicast topology?
Colleagues, There is a leaf router with 1 WAN and 1 LAN interface (a remote branch). Why do I see so many (S, G) mroutes? Just for example: strj#sh ip mroute 224.0.1.3 summary [dd] (*, 224.0.1.3),...
2
|
12 years ago
|
2 | |
|
c2600 - QoS in bridge mode
Hello I would like to do this: Router R1 - to the internet. atm0/0.1 atm to internet fast0/0 lan side 172.16.0.1/23 Since I am not able to do QoS on the outgoing ATM interface, I would like to drop a...
1
|
12 years ago
|
1 | |
|
IOS 15
I am running several 800 series modems with 12.4 IOS in them Will I see any improvement in ADSL line stabilty or faster operation under heavy load if I upgrade to IOS 15. any thoughts or comments...
1
|
12 years ago
|
1 |