Bridge Group question, getting encapsulation failed ...

Have a question or want to start a discussion? Post it! No Registration Necessary.  Now with pictures!

I am working on something in the lab, and I was wondering...

I have two HDLC serial connections that I am bridging together...

bridge irb
!
interface Serial0
 no ip address
 clockrate 56000
 bridge-group 1
!
interface Serial1
 no ip address
 clockrate 56000
 bridge-group 1
!
interface BVI1
 ip address 10.254.39.227 255.255.255.248
!
bridge 1 protocol ieee
bridge 1 bridge ip              < - this command has been entered but
doesn't show up in the config


The other two routers are at .225 and .226

When I ping from 226 (remote router with an IP on its main) to 227, I get:

00:35:38: IP: tableid=0, s=10.254.39.227 (local), d=10.254.39.226 (BVI1),
routed  via RIB
00:35:38: IP: s=10.254.39.227 (local), d=10.254.39.226 (BVI1), len 100,
sending 00:35:38: IP: s=10.254.39.227 (local), d=10.254.39.226 (BVI1), len
100, encapsulation failed

Why?



Jonathan




Site Timeline