Latest threads in Cisco Certificationshow only best voted threads

Subject Author Posted Replies
 
CCNA 801 exam vs 821 and 811 exams
Can anyone tell me the difference by with the composite exam vs the two exams for ccna in terms of simulations?
4
4
 
Spanning Tree Priority change
Hello- I saw this question on a mock exam about why would an administrator change the value of the spanning tree priority of a switch.(it didnt specify how it would change the value) I thought the...
3
3
 
Hardware Question
I would rate them in this order: 3550 (L3) -----> 2950(L2) -------> 3500/2900-XL series (L2) The 3500-XL has been EOS/EOL for a while now while the 2950 is still current but some models are EOS/EOL:
3
3
 
CCIE Security Lab v2.0
Hi Has anyone had a crack at the new CCIE security lab that became effective on January 1 ? Just wondering how much of the routing and route redistribution has been removed ? Also , to what extend NAC...
1
1
 
VLSM HELP IN ST. LOUIS, MO
Hi! I am desperate to conquer VLSM, and haven't gotten the help I need in class. I was hoping if someone out there in St. Louis MO could contact me, I would pay them $20 /hr for help. By my estimate,...
4
4
 
Boson Netsim CCNP
Hi NG, i installed Boson Netsim for CCNP now on several PCs, as i start it up i get an "Run-time error '7'; out of memory. i got it running on my oldest box, but im unable to get it running on my...
3
3
 
CCNA INTRO 640-821
I know, that's where I struggled to be honest, I think it's why I failed the exam
10
10
 
Please help me to solve the access list problems
Busted :-)
2
2
 
IOS noob - load a startup configuration
I need to know how to get my configuration to load on start up. I get the router configured, save the configuration and copy it to startup-config. When I power cycle the router the setup command...
3
3
 
need help on port opening
Hi guys, I need your help on port forwarding on CISCOrouter, I am new to configuring CISCO router, any way I did configuer my router, now I can internet and send and recieve mail, so this part is...
1
1
 
DHCP and default GW
Hi, i have the following problem: I have eth1 connected to Internet, an IP address is assigned via DHCP. Eth0 is connected to LAN and it has staticly assigned IP address. How to configure router to...
4
4
 
Cisco 800 router updates a 2003 DNS server Meer opties [DDNS]
Hello, Is it possible to configure my Cisco 800 router to update my remote Windows 2003 DNS server with DDNS? I'm trying this for weeks now, with the use of this website: Googled a lot, but I can't...
 
Switch Engine
Hi all, First question : For the Catalyst 6500, what is the role of the module "Supervisor Engine 720" please ? is it like the mother card of desktop ? which provide memory, processor, ios, bus,...
2
2
 
vlan configuration
For the following configurations, is there any difference besides the configuration 1 needs trunking for the switch port? In configuration 2, the PC port of the VOIP phone connects to the port of the...
4
4
 
CCNA exam
Thanks I'm going to give the test another go in a week or so - think I know where I went wrong I also suffered a lot from time pressure but ended up with four minutes left at the end of the test. Hope...
7
7