Latest threads in Cisco Certificationshow only best voted threads

Subject Author Posted Replies
 
CCNA Question of the day.
Hi All, I have recently passed my CCNA exam but I don't want to get rusty. Does anyone know of a way to get Cisco routing "questions of the day" emailed to yourself ? Thanks, - Pat
2
2
 
A New Router How-To website
Hi all, I am working on a new website that I want to make a "How-To" reference for Cisco routers. Please take the time to visit it and give me your notes. The link is: would like to know if there are...
 
router on a stick
setup: 2501 - ios 12.3 (connected to switchport config'd as trunk) 2950 - ios 12.1 host 1 = 192.168.10.3 (connected to switchport config'd as vlan10) host 2 = 192.168.20.3 (connected to switchport...
21
21
 
Cisco
Hi how u doing all i wish to get Boson NetSim for CCNA 6.0 full with full commands yeco
1
1
 
WS-C2924M-XL-A for lab
Is the WS-C2924M-XL-A acceptable for the CCNP lab? I'm not what sure the differences are between that and the EN, but any help would be appreciated. Thanks
1
1
 
Have the best rates in VOIP.
Best quality and 10 minutes of free termination so you can do proofs right now. Open your free account (without compromise) just clicking here you have some of aur rates: 93 Afghanistan Other 0,2337...
 
ISDN BRI back to back
Hi, Is there any way to connect 2 ISDN BRI S/T interfaces back-to-back (without expensive equipment in between) ? (this is for CCNA purposes) TIA Richard.
4
4
 
Have the best rates in VOIP.
Best quality and 10 minutes of free termination so you can do proofs right now. Open your free account (without compromise) just clicking here you have some of aur rates: 93 Afghanistan Other 0,2337...
 
Tutorials
site has some good tutorials for using Dynamips for routers simulation.
1
1
 
recommended hardware for an inexpensive but adequate CCIE home lab
Hi, all I've been hunting around looking for a recommended list of hardware that would be adequate for a home lab so I can start working on my CCIE later this year. people use 3550s), and about 6-8...
1
1
 
640-801 Test Sims
Please forgive me if this is a repeated post. I was wondering if there are a few simulation scenarios on the actual vendor test that I should definitely know above others, and on average is there an...
2
2
 
Layer 3 switch model?
Hi, I'm a college student & my final year project is to upgrade & reconfigure my college network... The college has 700 PC's. It's an adhoc network. I have recommended VLANS. In all there will be 7...
1
1
 
Offer--Equipment and books
I'm an ex-CCNA instructor who wishes to unload two 2501 routers and one 1924 EN switch (cabling and transceivers included, of course). I will throw in about a dozen Cisco Press text books, several...
 
Configuring IGRP on a 2501 (according to Todd Lammle's book)
I have been studying for my ccna sice start of Feb this year - I have a lab consisting of 1 x 2501 router and 2 x 2503 router and 2 1900 catalyst switches...I am using Todd Lammle's Sybex book as my...
2
2
 
BGP routing
Well, it would evaluate the desirability of the routes. But, if you are asking from a DOS perspective, the routers would need to have established a relationship first. So, you can't just pop a BGP...
1
1