Latest threads in Cisco Certificationshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
Work at Force10 - CCIEs wanted
Force10 Networks Inc. is rapidly growing and looking for talented CCIEs for SE and CSE positions with present openings in the Bay Area, Houston, and Toronto regions. More job details below, but...
1
|
16 years ago
|
1 | |
|
|
STP changes...
Hello all On our network i see quite a few stp topology changes. What can be causing a STP topology change? Does the small 8 port switches that users tend to add to a network send bpdu's? Can the...
4
|
16 years ago
|
4 | |
|
|
CDP ?
When doing a SHOW CDP NEIGHBORS DETAIL on a switch, what information will be given about the hosts. The Cisco book says that only Cisco devices will be described, but the output shows an H for host....
4
|
16 years ago
|
4 | |
|
|
Locked out of switch
Due to the problem I had on my switches (2950s) recently I decided to wipe them both & start afresh, this worked fine with SWITCH1, but unfortunately after initially configuring SWITCH2 I somehow have...
3
|
16 years ago
|
3 | |
|
|
640-802 passed .. what now..
That depends how you look at it. If you are primarily voice, then you may just want to knock your CCVP out because it is more relevant to your job. On the other hand, you may want to go for CCNP to...
4
|
16 years ago
|
4 | |
|
|
Sticky Port problem
I have noticed something strange when I configure port-security on my "SWITCH1". When I configure a sticky mac address everything seems to work as it should, i.e. when I plug another device into the...
1
|
16 years ago
|
1 | |
|
|
CCNA, Calculating Subnets and ip subnet zero
Hi, I know traditionally we didn't count the first and last subnet (all zeroes and all ones). So a subnet mask of 255.255.255.192 would give (2^2)-2, or 2, subnets while a mask of 255.255.255.224...
3
|
16 years ago
|
3 | |
|
|
Router 2621 10/100mb ??
Hi Group, I was looking for either a 10 or 100 mb card for my 2621. Does any one know the model number of the expansion card that is required. I have looked on the www and have found nothing pointing...
1
|
16 years ago
|
1 | |
|
|
Block arp packets on Catalyst switch
Hi, I'm trying to completely block arp packets per port. if not possible on a port, then blocking arp packets on a vlan would help as well. I know all I'm going to get in replies is people telling me...
7
|
16 years ago
|
7 | |
|
|
all CCNA exploration modules answers
almost everything is correct gordan http://www.ccna-exams.com
1
|
16 years ago
|
1 | |
|
|
cisco catalyst 2948G-L2
Hi, I seek the image file for one catalyst 2948 ! somebody have this TAR file ? thx
—
|
16 years ago
|
— | |
|
|
refund flight and hotel expenses incurred at the first CCIE lab attempt, in addition to a 100% FREE repeat CCIE Boot Camp.
CCIE Voice Boot camp 12 days............ I came across this training camp conducted by qurdruple CCIE instructor, and has a very high pass rate. This is there guarantee policy terms:
4
|
16 years ago
|
4 | |
|
|
Starting CCVP? or Studying for CCVP?
I came across this Free seminar Introduction to CCVP Introduction to CCVP": conducted by an industry leader in CCIE Voice training in UK and North America. http://www.winnetsystems.co.uk/freeccvp.html
—
|
16 years ago
|
— | |
|
|
ccna exam..
wondering about time constraints.. what i should try to focus on to get my speed up .. thanks,
5
|
16 years ago
|
5 | |
|
|
info reg CCSI/ICP certification
Hi, please share your experience of taking the ICP/CCSI lab exam, the topics covered, is it configuration only or troubleshooting lab. Thanks in advance, Raj
—
|
16 years ago
|
— |