LAN and Telecom Cabling Path to getting an electrician's license in NJ

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Path to getting an electrician's license in NJ wooliewillie 10-22-04
Posted by wooliewillie on October 22, 2004, 6:51 pm
Please log in for more thread options

Someone related to me mentioned that I should research the path to master
electrician's license, instead of the RCDD.I have done a little research
and it seems that my EE degree will take care of 3 years of the 5 years of
experience that is required for the master electrician's license in NJ.
How do I (at 46 years old) go about getting the additional two years of
experience? Is there some training that will cause a master electrician to
hire me so I can get some experience? How about getting the BICSI
Commercial Installer's cert? Will that get me a job doing the proper work
for the proper employer? How can I go about getting this work in NJ?
-------------------------------------






##-----------------------------------------------##

Article posted with Cabling-Design.com Newsgroup Archive

http://www.cabling-design.com/forums

no-spam read and post WWW interface to your favorite newsgroup -

comp.dcom.cabling - 4760 messages and counting!

##-----------------------------------------------##


Posted by Dmitri(Cabling-Design.com on October 22, 2004, 7:42 pm
Please log in for more thread options
wooliewillie wrote:

> Someone related to me mentioned that I should research the path to
> master
> electrician's license, instead of the RCDD.I have done a little
> research
> and it seems that my EE degree will take care of 3 years of the 5 years
> of
> experience that is required for the master electrician's license in NJ.
> How do I (at 46 years old) go about getting the additional two years of
> experience? Is there some training that will cause a master electrician
> to
> hire me so I can get some experience? How about getting the BICSI
> Commercial Installer's cert? Will that get me a job doing the proper
> work
> for the proper employer? How can I go about getting this work in NJ?
> -------------------------------------

Are you trying to get hired or open your own business? This would greatly
affect your choice.
As for the training, you may want to find your local IBEW Union and ask
them about some training programs they might have. You'd have to get your
Union card etc, but if that's what you want to do, then it's up to you.
Note that if you become a Union guy, you will cost your potential employer
great deal more money and headaches, so you thus effectively limit your
potential employers to Union companies only.

This seems like rather strange way of getting into cabling and networking
design/consulting business. Whoever suggested you get master electrician
designation, did they know all the details of your future plans? You are
not going to go through that great deal of trouble to become just another
electrician, are you?

--
Dmitri Abaimov, RCDD
http://www.cabling-design.com
Cabling Forum, color codes, pinouts and other useful resources for
premises cabling users and pros
http://www.cabling-design.com/homecabling
Residential Cabling Guide
-------------------------------------





##-----------------------------------------------##

Article posted with Cabling-Design.com Newsgroup Archive

http://www.cabling-design.com/forums

no-spam read and post WWW interface to your favorite newsgroup -

comp.dcom.cabling - 4761 messages and counting!

##-----------------------------------------------##


Posted by wooliewillie on October 22, 2004, 8:43 pm
Please log in for more thread options
Well, I think his point was that there is alot more work for licensed
independant electricans than there are for network cable pullers/network
designers. I think that I mentioned this, but I want to to work
independantly for small to mid size co's who want to modify their
networks, both geographically and logically. Bottom line though, is I want
to make enough money to be able to pay the mortgage.

-------------------------------------
Dmitri(Cabling-Design.com wrote:

> wooliewillie wrote:

>> Someone related to me mentioned that I should research the path to
>> master
>> electrician's license, instead of the RCDD.I have done a little
>> research
>> and it seems that my EE degree will take care of 3 years of the 5
>> years
>> of
>> experience that is required for the master electrician's license
>> in NJ.
>> How do I (at 46 years old) go about getting the additional two
>> years of
>> experience? Is there some training that will cause a master
>> electrician
>> to
>> hire me so I can get some experience? How about getting the BICSI
>> Commercial Installer's cert? Will that get me a job doing the
>> proper
>> work
>> for the proper employer? How can I go about getting this work in
>> NJ?
>> -------------------------------------

> Are you trying to get hired or open your own business? This would
> greatly
> affect your choice.
> As for the training, you may want to find your local IBEW Union and ask
> them about some training programs they might have. You'd have to get
> your
> Union card etc, but if that's what you want to do, then it's up to you.
> Note that if you become a Union guy, you will cost your potential
> employer
> great deal more money and headaches, so you thus effectively limit your
> potential employers to Union companies only.

> This seems like rather strange way of getting into cabling and
> networking
> design/consulting business. Whoever suggested you get master
> electrician
> designation, did they know all the details of your future plans? You
> are
> not going to go through that great deal of trouble to become just
> another
> electrician, are you?







##-----------------------------------------------##

Article posted with Cabling-Design.com Newsgroup Archive

http://www.cabling-design.com/forums

no-spam read and post WWW interface to your favorite newsgroup -

comp.dcom.cabling - 4762 messages and counting!

##-----------------------------------------------##


Posted by Dmitri(Cabling-Design.com on October 22, 2004, 9:15 pm
Please log in for more thread options

wooliewillie wrote:

> Well, I think his point was that there is alot more work for licensed
> independant electricans than there are for network cable
> pullers/network
> designers. I think that I mentioned this, but I want to to work
> independantly for small to mid size co's who want to modify their
> networks, both geographically and logically. Bottom line though, is I
> want
> to make enough money to be able to pay the mortgage.

> -------------------------------------

The question of how much work there is out there for any particular trade
cannot be answered outside the context of the actual economic situation as
well as the direction the economics is heading. When money is tight,
people spend them on bare necessities, and electricity is one of them.
Internet access as well as other networks would obviously be secondary.
But if the economy is going to do any better any time soon, people will
surely increase spending money on networks.

One other thing you may want to consider is that competition among
electrician is even more fierce, simply because there is more of them out
there.

--
Dmitri Abaimov, RCDD
http://www.cabling-design.com
Cabling Forum, color codes, pinouts and other useful resources for
premises cabling users and pros
http://www.cabling-design.com/homecabling
Residential Cabling Guide
-------------------------------------




##-----------------------------------------------##

Article posted with Cabling-Design.com Newsgroup Archive

http://www.cabling-design.com/forums

no-spam read and post WWW interface to your favorite newsgroup -

comp.dcom.cabling - 4763 messages and counting!

##-----------------------------------------------##


Posted by wooliewillie on October 23, 2004, 12:18 am
Please log in for more thread options
>>One other thing you may want to consider is that competition among
>>electrician is even more fierce, simply because there is more of them out
>>there.

But from what I am understanding, any of them (the high voltage types) can
do either, low or high voltage wiring, while only they can do power.


-------------------------------------
Dmitri(Cabling-Design.com wrote:

> wooliewillie wrote:

>> Well, I think his point was that there is alot more work for
>> licensed
>> independant electricans than there are for network cable
>> pullers/network
>> designers. I think that I mentioned this, but I want to to work
>> independantly for small to mid size co's who want to modify their
>> networks, both geographically and logically. Bottom line though,
>> is I
>> want
>> to make enough money to be able to pay the mortgage.

>> -------------------------------------

> The question of how much work there is out there for any particular
> trade
> cannot be answered outside the context of the actual economic situation
> as
> well as the direction the economics is heading. When money is tight,
> people spend them on bare necessities, and electricity is one of them.
> Internet access as well as other networks would obviously be secondary.
> But if the economy is going to do any better any time soon, people will
> surely increase spending money on networks.

> One other thing you may want to consider is that competition among
> electrician is even more fierce, simply because there is more of them
> out
> there.







##-----------------------------------------------##

Article posted with Cabling-Design.com Newsgroup Archive

http://www.cabling-design.com/forums

no-spam read and post WWW interface to your favorite newsgroup -

comp.dcom.cabling - 4764 messages and counting!

##-----------------------------------------------##


Similar ThreadsPosted
Path to getting an electrician's license in NJ October 22, 2004, 6:51 pm