RC-80B Thermostat Issue!
Bookmark this page:
 Yahoo!
 Google
 Windows Live
 del.icio.us
 digg
 Netscape
|
|
|||||||||||||
|
Posted by Tony Huk on November 28, 2005, 10:03 am
Please log in for more thread options All, I have 2 RC-80B Stats connected to an HAI Omni-Pro II controller. Both thermostats have worked correctly since installation in June '05. However, one of my thermostats no longer reports current room temperature to the controller... it reports "0" as the temperature. All other functions on this thermostat seem to work, including remote operation. Lastly, the thermostat's local display shows the correct room temp. Any advice or suggestions would be greatly appreciated!!! Regards, Tony | |||||||||||||
|
Posted by Tony Huk on November 28, 2005, 10:38 am
Please log in for more thread options Sorry folks... I found the problem. It was a broken lead inside the Omni cabinet affecting the received signals from the stat... "It always pays to check things twice!" Regards Tony | |||||||||||||
| Similar Threads | Posted |
| RC-80B Thermostat Issue! | November 28, 2005, 10:03 am |
| networked thermostat? | October 20, 2004, 12:46 pm |
| is there a thermostat with dial in and wan ? | November 1, 2004, 10:33 am |
| OMNI Pro II Zone Secure Issue | October 29, 2005, 10:48 pm |
>
> I have 2 RC-80B Stats connected to an HAI Omni-Pro II controller. Both
> thermostats have worked correctly since installation in June '05. However,
> one of my thermostats no longer reports current room temperature to the
> controller... it reports "0" as the temperature. All other functions on
> this thermostat seem to work, including remote operation.
>
> Lastly, the thermostat's local display shows the correct room temp.
>
> Any advice or suggestions would be greatly appreciated!!!
>
> Regards,
>
> Tony
>