Latest threads in Home Automationshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
FS: SONY HD353CW security spy camera
http://easyurl.net/SonySpyCamera
—
|
15 years ago
|
— | |
|
FS: INSTEON PowerLinc V2 Controller USB 2414U
for looking. Eric http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=280229902769 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem
—
|
15 years ago
|
— | |
|
Ping: David White
Hi David, I just wanted to say thanks, I now have the macros functioning in my X-10 Active Home. My problem was dragging them into the macro without the on/off state in the proper mode. Your...
1
|
15 years ago
|
1 | |
|
Active Home Question
Still somewhat of a newbie... I am using ActiveHome 1.42 with my CM11A. My computer is connected to the CM11A and the communications routines are running. But I when a macro I have downloaded into the...
4
|
15 years ago
|
4 | |
|
X-10 Active Home?
Hi all, I'm using Active Home for my X-10 interface and can't stand it. Is there better software for controlling my modules? My biggest complaints are that using 10 modules and the sunrise/sunset...
15
|
15 years ago
|
15 | |
|
XPS-3 Strangeness
Hello. I recently purchased and installed 2 XPS-3 switches I got off EBay. One has a WS-14A/XPSS companion switch. Almost as soon as I installed these, I have noticed that the one with the companion...
11
|
15 years ago
|
11 | |
|
32 Years of X-10
greenpjs I normally can't remember my middle name, but do remember when I bought my first X10 "starter set " at Sears. A plug-in controller with an ultrasonic remote control and two lamp modules and...
4
|
15 years ago
|
4 | |
|
X10 Controller Oddness?
I am still somewhat new to all this so pardon the newbie questions... I have 2 manual controllers, a CMA11, a number of modules (light and applicance), and a couple switches (XPS3 alone and with XPSS...
13
|
15 years ago
|
13 | |
|
oil fired furnace X-10 off/on switch control
I live in the Northeast and have an oil fired furnace which provides hot water to heat the house and for domestic hot water. During the warm months we turn off the oil furnace when we do not need hot...
—
|
15 years ago
|
— | |
|
Panasonic BLC-30/BLC-131 versus BLC-1/BLC-20
All the above are IP network cameras for home monitoring. The BLC-30 and the later BLC-131 feature remote pan/tilt while the BLC-131 also features sound and MPEG-4 streaming. However... I have found...
1
|
15 years ago
|
1 | |
|
X-10 Switch Question
I am somewhat new to all this so pardon what may be a dumb question... I just ordered and received one WS14A/XPSS and two XPS-3 20 amp light switches. I just took them out of the box and was trying...
4
|
15 years ago
|
4 | |
|
light switching
Slight addition: what I did way, way, back, when there was a "pull chain" light at the far end of a room (that is, you entered the doorway and the light was ten feet away) was.... ... I placed a...
5
|
15 years ago
|
5 | |
|
ceiling light switching
Ok, I'm a dummy. I put 4 ceiling boxes on the same switch, now I want to control them separately. What are my choices besides: 1.. rewiring 2.. pull chains I considered the x10 stuff, but I don't...
—
|
15 years ago
|
— | |
|
FSK or ASK?
Hello, I have been doing some search on powerline related materials. A member of a different group suggested me to look into Home Automation Modems. I found there are 2 types available, one working on...
—
|
16 years ago
|
— | |
|
Line out audio over phone cable?
Hi all, I'm working on a whole house FM transmitter project and would like to mount the xmitter in my cupola to get it good and high. So I need to get the audio line out signal from my wiring closet...
4
|
16 years ago
|
4 |